Pressure-Treated Lumber

Cardinal specializes in carrying a wide variety of pressure-treated lumber, both in #1 grade (with fewer knots, less wane, and better appearance) and #2 (mainly used for structural applications). Treated lumber provides many benefits. Our wood is treated locally with mold inhibitors and preservatives. We offer #1 and #2 grades (rated for ground contact and made from Southern Yellow Pine), CCA Treated Lumber (available for certain commercial, industrial, and agricultural applications), as well as premium treated decking boards and lumber that is kiln dried after treatment. In addition to selling regular Framer Series™ lumber, we also pressure-treat some of our Framer Series™ lumber, combining the unique properties of Weyerhaeuser’s lumber with the protection of pressure treatment. We are one of the only retailers in the area to offer this.

Where to use ground contact lumber:

1. In contact with the ground, fresh water.
2. In above-ground areas that are considered difficult to maintain, repair or replace and are critical to the performance and safety of the entire system/construction.
3. Above ground but may end up in ground contact or are subject to hazards comparable to ground contact due to climate, artificial or natural processes or construction.

Setting us apart from the rest, we’re among the select few local companies treating our lumber before it hits the shelves. Sourced locally, our wood undergoes a specialized treatment process at Madison Wood Preservers. They infuse it with preservatives and mold inhibitors. The result? Lumber with superior strength.

Please note: some 12′ and 14′ lengths of treated Framer Series™ lumber are not stocked. Ask your sales associate about availability and ordering.

2″ x 4″ M-9 Treated Weyerhaeuser Framer Series Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′

Weyerhaeuser’s Framer Series™ lumber uses a computerized grading system to ensure that every piece of lumber starts straight and stays straight. Framer Series maximizes your labor, your budget, and your stellar reputation. This board is also pressure treated at Madison Wood Preservers to protect it from fungal decay, rot, and termites and has a .15 MCA rating. Best used for wall framing, joists, beams, and headers.

• Nominal Dimensions: 2″ x 4″
• Actual Dimensions: 1-1/2″ x 3-1/2″
• .15 MCA rated
• M-9 machine graded
• Reduced callbacks
• Enhanced design flexibility
• No more field culling
• Labor savings
• Reduced job site framing waste
• Streamlined underlayment installation
• Mold inhibitor helps material stay clean and bright, reducing product loss and callback

2″ x 6″ M-9 Treated Weyerhaeuser Framer Series Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′, 20′

Weyerhaeuser’s Framer Series™ lumber uses a computerized grading system to ensure that every piece of lumber starts straight and stays straight. Framer Series maximizes your labor, your budget, and your stellar reputation. This board is also pressure treated at Madison Wood Preservers to protect it from fungal decay, rot, and termites and has a .15 MCA rating. Best used for wall framing, joists, beams, and headers.

• Nominal Dimensions: 2″ x 6″
• Actual Dimensions: 1-1/2″ x 5-1/2″
• .15 MCA rated
• M-9 machine graded
• Reduced callbacks
• Enhanced design flexibility
• No more field culling
• Labor savings
• Reduced job site framing waste
• Streamlined underlayment installation
• Mold inhibitor helps material stay clean and bright, reducing product loss and callback

2″ x 8″ M-29 Treated Weyerhaeuser Framer Series Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′, 18′, 20′

Weyerhaeuser’s Framer Series™ lumber uses a computerized grading system to ensure that every piece of lumber starts straight and stays straight. Framer Series maximizes your labor, your budget, and your stellar reputation. This board is also pressure treated at Madison Wood Preservers to protect it from fungal decay, rot, and termites and has a .15 MCA rating. Best used for wall framing, joists, beams, and headers.

• Nominal Dimensions: 2″ x 8″
• Actual Dimensions: 1-1/2″ x 7-1/4″
• .15 MCA rated
• M-29 machine graded
• Reduced callbacks
• Enhanced design flexibility
• No more field culling
• Labor savings
• Reduced job site framing waste
• Streamlined underlayment installation
• Mold inhibitor helps material stay clean and bright, reducing product loss and callback

2″ x 10″ M-29 Treated Weyerhaeuser Framer Series Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′, 18′, 20′

Weyerhaeuser’s Framer Series™ lumber uses a computerized grading system to ensure that every piece of lumber starts straight and stays straight. Framer Series maximizes your labor, your budget, and your stellar reputation. This board is also pressure treated at Madison Wood Preservers to protect from fungal decay, rot, and termites and has a .15 MCA rating. Best used for wall framing, joists, beams, and headers.

• Nominal Dimensions: 2″ x 10″
• Actual Dimensions: 1-1/2″ x 9-1/4″
• .15 MCA rated
• M-29 machine graded
• Reduced callbacks
• Enhanced design flexibility
• No more field culling
• Labor savings
• Reduced job site framing waste
• Streamlined underlayment installation
• Mold inhibitor helps material stay clean and bright, reducing product loss and callback

2″ x 12″ M-29 Treated Weyerhaeuser Framer Series Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′, 18′, 20′

Weyerhaeuser’s Framer Series™ lumber uses a computerized grading system to ensure that every piece of lumber starts straight and stays straight. Framer Series maximizes your labor, your budget, and your stellar reputation. This board is also pressure treated at Madison Wood Preservers to protect from fungal decay, rot, and termites and has a .15 MCA rating. Best used for wall framing, joists, beams, and headers.

• Nominal Dimensions: 2″ x 10″
• Actual Dimensions: 1-1/2″ x 11-1/4″
• .15 MCA rated
• M-29 machine graded
• Reduced callbacks
• Enhanced design flexibility
• No more field culling
• Labor savings
• Reduced job site framing waste
• Streamlined underlayment installation
• Mold inhibitor helps material stay clean and bright, reducing product loss and callback

Each of our treated decking boards is hand-selected to provide the highest 2×6 wet decking product available on the market. Because our boards are milled based on appearance and not grain, kerfs are cut in the bottom to help with cupping.

2″ x 6″ C & Better Pressure Treated SelectDeck, .15 MCA

Lengths: 12′, 16′, 20′

Madison Wood’s SelectDeck^® is a homeowner’s dream. The C-Grade SelectDeck^® has a smooth texture, a clean surface, and money-saving advantages. Has fewer knots than #1 treated lumber. Each board is milled based on appearance and not grain. Kerfs are cut at the bottom to help with cupping.

• Nominal Dimensions: 2″ x 6″
• Actual Dimensions: 1-1/2″ x 5-1/2″
• Grade C – virtually clear of knots and imperfections
• No grade stamps on the top side
• Kerfs on the bottom side to reduce cuffing
• MadGuard™ added to slow wood’s moisture intake and release which can cause checking/splitting
• .15 MCA rated for ground contact

5/4″ x 6″ #1 Treated Premium R.E.D. Decking, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′, 20′

Recommended where smaller knots are desired and appearance is of the utmost importance. Has minimal wane and knots, great strength and appearance. Costs less than composite decking and has a natural appearance for your deck.

• Nominal Dimensions: 5/4″ x 6″
• Actual Dimensions: 1″ x 5-1/2″
• #1 Pressure Treated – appearance grade lumber with smaller and tighter knots
• Premium Grade Radius Edge Decking
• .15 MCA rated for ground contact

5/4″ x 6″ #1 Dry Treated Premium R.E.D. Decking, .15 MCA

Lengths: 12′, 16′

Recommended where smaller knots are desired and appearance is of the utmost importance. Has minimal wane and knots, great strength and appearance. Costs less than composite decking and has a natural appearance for your deck.

• Nominal Dimensions: 5/4″ x 6″
• Actual Dimensions: 1″ x 5-1/2″
• Premium Grade Radius Edge Decking
• Kiln Dried After Treatment: Ready to paint/stain immediately
• .15 MCA rated for ground contact

5/4″ x 6″ #2 Treated Standard R.E.D. Decking,.15 MCA

Lengths: 8′, 10′, 12′, 16′

Recommended for price-conscious consumers who do not mind occasional knots. Has minimal wane, great strength, and a low price point. Costs less than composite decking and has a natural appearance for your deck.

• Nominal Dimensions: 5/4″ x 6″
• Actual Dimensions: 1″ x 5-1/2″
• #2 Pressure Treated
• Standard Grade Radius Edge Decking
• .15 MCA rated for ground contact

Give your outdoor stairs a strong foundation that will last for years to come.

2″ x 12″ x 36″ 3-Step Stair Stringer

Hold up stair treads with this 3-step stair stringer that meets the #1 grading standards for strength and appearance. The lumber is pressure-treated, protecting it from termites and rot. Ideal for a variety of applications, including decks, docks, and other outdoor projects where lumber is exposed to the elements. When used properly, it is both safe and environmentally friendly.

• Dimensions: 2″ x 12″
• Length: 36″
• Number of steps: 3
• Run: 11″
• Rise: 7″
• Back: 5″
• Cut from #1 2×12’s
• Treated to ground contact standards
• Made from southern yellow pine
• Treated with MCA

3-Step Treaded Stair Stringer

Number of Steps: 3, Rise Size: 6-3/4 in, Run Size: 10 in, Wood, Treated, Yellow, 35.64 in L, 11-1/4 in W, Suitable for: Ground Contact

• Length: 35.64 in
• Number of Steps: 3
• Rise Size: 6-3/4 in
• Run Size: 10 in
• Suitable for: Ground Contact
• Width: 11-1/4 in

2″ x 12″ x 48″ 4-Step Stair Stringer

Hold up stair treads with this 4-step stair stringer that meets the #1 grading standards for strength and appearance. The lumber is pressure-treated, protecting it from termites and rot. Ideal for a variety of applications, including decks, docks, and other outdoor projects where lumber is exposed to the elements. When used properly, it is both safe and environmentally friendly.

• Dimensions: 2″ x 12″
• Length: 48″
• Number of steps: 4
• Run: 11″
• Rise: 7″
• Back: 5″
• Cut from #1 2×12’s
• Treated to ground contact standards
• Made from southern yellow pine
• Treated with MCA

4-Step Treaded Stair Stringer

Number of Steps: 4, Rise Size: 6-3/4 in, Run Size: 10 in, Wood, Treated, Yellow, 47.71 in L, 11-1/4 in W, Suitable for: Ground Contact

• Length: 47.71 in
• Material: Wood
• Number of Steps: 4
• Rise Size: 6-3/4 in
• Run Size: 10 in
• Suitable for: Ground Contact
• Width: 11-1/4 in

2″ x 12″ x 60″ 5-Step Stair Stringer

Hold up stair treads with this 5-step stair stringer that meets the #1 grading standards for strength and appearance. The lumber is pressure-treated, protecting it from termites and rot. Ideal for a variety of applications, including decks, docks, and other outdoor projects where lumber is exposed to the elements. When used properly, it is both safe and environmentally friendly.

• Dimensions: 2″ x 12″
• Length: 60″
• Number of steps: 5
• Run: 11″
• Rise: 7″
• Back: 5″
• Cut from #1 2×12’s
• Treated to ground contact standards
• Made from southern yellow pine
• Treated with MCA

5-Step Treaded Stair Stringer

Number of Steps: 5, Rise Size: 6-3/4 in, Run Size: 10 in, Wood, Treated, Yellow, 59.77 in L, 11-1/4 in W, Suitable for: Ground Contact

• Length: 59.77 in
• Material: Wood
• Number of Steps: 5
• Rise Size: 6-3/4 in
• Run Size: 10 in
• Suitable for: Ground Contact
• Width: 11-1/4 in

CCA-treated wood is available for certain commercial, industrial, highway, and agricultural applications, providing protection from termites, other wood-destroying organisms, and fungal decay. CCA timbers are a great option for agriculture pole barns where critical structure-treated poles are required. *Note: Cannot be used in residential settings

4″ x 4″ #2 Treated Pine, S4S .60 CCA

Length: 12′

The CCA wood preservative system meets the American Wood Protection Association (AWPA) Standards and meets all major building code requirements. CCA treated wood is available for certain commercial, industrial and agricultural applications, providing protection from termites, other wood-destroying organisms, fungal decay, and uses in the harshest marine environments. *Note: Cannot be used in residential settings

• Nominal Dimensions: 4″ x 4″
• Actual Dimensions: 3-1/2″ x 3-1/2″
• Southern Yellow Pine
• #2 Pressure Treated Lumber
• Smooth on all 4 sides
• .60 CCA rated for Heavy Duty Ground Contact

6″ x 6″ #2 Treated Pine, S4S .60 CCA

Lengths: 16′, 20′, 24′

CCA treated wood is available for certain commercial, industrial, highway, and agricultural applications, providing protection from termites, other wood-destroying organisms, and fungal decay. CCA timbers are a great option for agriculture pole barns where critical structure treated poles are required. *Note: Cannot be used in residential settings

• Nominal Dimensions: 6″ x 6″
• Actual Dimensions: 5-1/2″ x 5-1/2″
• Southern Yellow Pine
• #2 Pressure Treated Lumber
• Smooth on all 4 sides
• .60 CCA rated for Heavy Duty Ground Contact

4″ x 6″ x 8′ #2 Treated Pine, Rough Sawn, .23 CCA

The CCA wood preservative system meets the American Wood Protection Association (AWPA) Standards and meets all major building code requirements. CCA treated wood is available for certain commercial, industrial and agricultural applications, providing protection from termites, other wood-destroying organisms, fungal decay, and uses in the harshest marine environments. *Note: Cannot be used in residential settings

• Nominal Dimensions: 4″ x 6″
• Actual Dimensions: 4″ x 6″
• Length: 8′
• Southern Yellow Pine
• #2 Pressure Treated Lumber
• Rough sawn
• .60 CCA rated for Heavy Duty Ground Contact

KDAT material is kiln dried after treatment which means the board is lighter, easier to install, and can be painted or stained immediately upon completing your project.

1″ x 4″ x 16′ KDAT Treated Tongue & Groove Porch Flooring

A superior choice for exterior porch flooring, Southern Pine is highly resistant to normal wear and possesses a uniquely warm and rich color that enhances any outdoor space. Flat grain flooring highlights the wood’s unique colors, grain pattern, and growth characteristics, offering rich and exceptional character exclusive only to Southern Pine. This product is kiln-dried after treatment.

• Dimensions: 1″ x 4″
• Length: 16′
• C & Better: Combination of B&B and C grades satisfies the requirements for a high-quality finish
• Kiln-dried after treatment
• Tongue and groove pattern
• Ready for stain or polyurethane

2″ x 4″ #1 KDAT Treated Southern Yellow Pine

Length: 16′

Madison Wood’s #1 2×4 KDAT material is kiln dried after treatment which means the board is lighter, easier to install, and can be painted or stained immediately upon the completion of your project.

• Nominal Dimensions: 2″ x 4″
• Actual Dimensions: 1-1/2″ x 3-1/2″
• Kiln Dried After Treatment – lumber is stronger and more dimensionally stable
• #1 Pressure Treated – clearer lumber with smaller and tighter knots
• .15 MCA rated for ground contact

2″ x 6″ #1 KDAT Treated Southern Yellow Pine

Length: 12′

KDAT material is kiln dried after treatment, where the wood is placed in a kiln after treatment to remove excess moisture, making it lighter, easier to install, and ready to paint/stain immediately upon completion of your project.

• Nominal Dimensions: 2″ x 6″
• Actual Dimensions: 1-1/2″ x 5-1/2″
• Kiln Dried After Treatment – lumber is stronger and more dimensionally stable
• #1 Pressure Treated KDAT Southern Yellow Pine
• Keep dry before and during installation
• Seal product immediately with paint or stain
• .15 MCA rated for ground contact

2″ x 6″ T&G KDAT Southern Yellow Pine, .15 MCA

Lengths: 12′, 16′

Pressure-treated to protect from fungal decay, rot, and termites. Treated with the MadGuard™ additive for protection against moisture absorption and release to help to minimize checking

• Nominal Dimensions: 2″ x 6″
• Actual Dimensions: 1-1/2″ x 5-1/2″
• Southern Yellow Pine
• Tongue & Groove pattern
• Kiln-dried after treatment
• .15 MCA rated for ground contact

#1 Pressure-treated Lumber is best for most general construction use where moderately high design values are required. #1 treated lumber will have a cleaner appearance and great strength and durability. #1 lumber has fewer knots but less visible natural characteristics. All of our #1 treated is contact grade, meaning it is designed to be in contact with the ground and still perform well. #1 treated can have wane and knotts. There is an appearance grade, C & Better, available in limited dimensions.

1″ x 2″ x 8′ Pressure Treated Furring Strip, .15 MCA

Furring strips are perfect for a wide range of uses, including carpentry, hobbies, shelving, and general finish work. Creates a level surface for attaching wallboard and paneling. Establishes an air space – useful for masonry, insulation, and cedar shingle projects. Easy to glue and has good nailing and screw holding properties.

• Nominal Dimensions: 1″ x 2″
• Actual Dimensions: 3/4″ x 1-1/2″
• Length: 8′
• #1 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

1” x 8” x 12’ D & Better Pressure Treated Lumber

When appearance is more of a factor, our D-Grade #1 boards will be perfect for your next project. D-grade boards are ideal for wall panels, roof trusses, and stair components.

• Nominal Dimensions: 1″ x 8″
• Actual Dimensions: 3/4″ x 7-1/4″
• Length: 12′
• Southern Yellow Pine
• D & Better grade

2″ x 2″ Square-End Balusters

Lengths: 3′, 3-1/2′, 8′

When you are looking for that finishing touch on your deck, balusters are the perfect solution — made from southern yellow pine and #1 pressure treated at .15 ground contact. Consult your local building code requirements for railing height and spacing between balusters.

• Nominal Dimensions: 2″ x 2″
• Actual Dimensions: 1-1/2″ x 1-1/2″
• Square ends
• .15 MCA rated for ground contact

2″ x 2″ 45-Degree 1-End Balusters

Length: 3′

When you are looking for that finishing touch on your deck, balusters are the perfect solution. Made from southern yellow pine and #1 pressure treated at .15 ground contact. Consult your local building code requirements for railing height and spacing between balusters.

• Nominal Dimensions: 2″ x 2″
• Actual Dimensions: 1-1/2″ x 1-1/2″
• ‘C’ 45 Degrees on one end
• .15 MCA rated for ground contact

2″ x 4″ Treated #1 Southern Yellow Pine

Lengths: 8′, 10′, 12′, 14′, 16′

Recommended for most general construction use where moderately high design values are required. Allows well-spaced knots. Ideal for a variety of applications, including decks, play sets, landscaping, stair support, walkways, and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 2″ x 4″
• Actual Dimensions: 1-1/2″ x 3-1/2″
• #1 Grade Southern Yellow Pine
• .15 MCA rated for ground contact

2″ x 4″ C & Better Pressure Treated Lumber, .15 MCA

Lengths: 12′, 16′

C & Better lumber is Madison Wood Preservers’ highest quality material. Although this lumber is mostly clear, it could have an occasional pitch pocket or small tight knot every four feet. Great for handrails!

• Nominal Dimensions: 2″ x 4″
• Actual Dimensions: 1-1/2″ x 3-1/2″
• .15 MCA rated for ground contact

2″ x 6″ Treated #1 Southern Yellow Pine

Lengths: 8′, 10′, 12′, 14′, 16′

Recommended for most general construction use where moderately high design values are required. Allows well-spaced knots. Ideal for a variety of applications, including decks, play sets, landscaping, stair support, walkways, and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 2″ x 6″
• Actual Dimensions: 1-1/2″ x 5-1/2″
• #1 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

2″ x 6″ C & Better Pressure Treated Lumber, .15 MCA

Lengths: 12′, 16′

C & Better lumber is Madison Wood Preservers’ highest quality material. Although this lumber is mostly clear, it could have an occasional pitch pocket or small tight knot every four feet. Great for handrails!

• Nominal Dimensions: 2″ x 6″
• Actual Dimensions: 1-1/2″ x 5-1/2″
• .15 MCA rated for ground contact

2” x 10” x 20’ #1 Pressure Treated Framing Lumber, .15 MCA

Pressure-treated to protect it from termites, fungal decay, and rot. Best used for wall framing, joists, beams, and headers.

• Nominal Dimensions: 2″ x 10″
• Actual Dimensions: 1-1/2″ x 9-1/4″
• Length: 20′
• #1 Pressure Treated Lumber
• .15 MCA rated for ground contact

4″ x 4″ x 8′ Squared Edge #1 Southern Yellow Pine

Pressure treated to protect from fungal decay, rot, and termites. Ideal for decks, play sets, landscaping, stair support, walkways and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 4″ x 4″
• Actual Dimensions: 3-1/2″ x 3-1/2″
• Length: 8′
• #1 Pressure Treated Southern Yellow Pine
• Square edging
• .15 MCA rated for ground contact

4″ x 4″ x 8′ 1/4″ Eased Edge #1 Southern Yellow Pine

Pressure treated to protect from fungal decay, rot, and termites. Ideal for decks, play sets, landscaping, stair support, walkways and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 4″ x 4″
• Actual Dimensions: 3-1/2″ x 3-1/2″
• Length: 8′
• #1 Pressure Treated Southern Yellow Pine
• 1/4″ Square edging removes sharp corners
• .15 MCA rated for ground contact

4″ x 4″ x 12′ Squared Edge #1 Southern Yellow Pine

Pressure treated to protect from fungal decay, rot, and termites. Ideal for decks, play sets, landscaping, stair support, walkways and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 4″ x 4″
• Actual Dimensions: 3-1/2″ x 3-1/2″
• Length: 12′
• #1 Pressure Treated Southern Yellow Pine
• Square edging
• .15 MCA rated for ground contact

4″ x 4″ x 12′ 1/4″ Eased Edge #1 Southern Yellow Pine

Pressure treated to protect from fungal decay, rot, and termites. Ideal for decks, play sets, landscaping, stair support, walkways and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 4″ x 4″
• Actual Dimensions: 3-1/2″ x 3-1/2″
• Length: 12′
• #1 Pressure Treated Southern Yellow Pine
• 1/4″ eased edging removes sharp corners
• .15 MCA rated for ground contact

4″ x 4″ x 10′ #1 Pressure Treated Timber

Pressure-treated to protect from fungal decay, rot, and termites. Ideal for decks, playsets, landscaping, stair support, walkways, and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 4″ x 4″
• Actual Dimensions: 3-1/2″ x 3-1/2″
• Length: 10′
• #1 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

7″ x 9″ x 8’6″ #1 Railroad Tie

Railroad ties are the perfect accessory for finishing off your landscaping. They add a natural yet practical accent to any yard. They make excellent retaining walls, pathways, steps, and borders. No returns are allowed on this item.

• Dimensions: 7″ x 9″
• Length: 8′ 6″
• Creosote Treated
• Wide variety of uses for landscaping projects
• For landscape application only

#2 Pressure-Treated Lumber is best for general framing purposes. This lumber will not have as clean of an appearance but is primarily graded for strength and serviceability. It will also have more visible natural characteristics.

1” x 4” #2 Pressure Treated Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 16′

1″ x 4″ strips are perfect for a wide range of uses, including carpentry, hobbies, shelving, trim, furring strips, and general finish work. Creates a level surface for attaching wallboard and paneling. Establishes an air space – useful for masonry, insulation, and cedar shingle projects.

• Nominal Dimensions: 1″ x 4″
• Actual Dimensions: 3/4″ x 3-1/2″
• #2 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

1″ x 6″ #2 Pressure Treated Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 16′

Recommended for most general construction use where moderately high design values are required. Allows well-spaced knots. Ideal for decks, exterior trim, fencing, and other uses.

• Nominal Dimensions: 1″ x 6″
• Actual Dimensions: 3/4″ x 5-1/2″
• #2 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

1″ x 6″ x 6′ #2 Dog-Ear Pressure Treated Boards, .15 MCA

Length: 6′

Dog ear top pickets are smooth on all four sides; which enhances the beauty of the picket. Use to build a new fence or for replacement pickets. Appearance grade boards have #2 size knots, but no wane, blue stain, or grade stamps on the faces. Easy to paint or stain, once they have dried down to 19% moisture.

• Nominal Dimensions: 1″ x 6″
• Actual Dimensions: 3/4″ x 5-1/2″
• #2 Pressure Treated Southern Yellow Pine
• Dog ear design
• .15 Appearance Grade rated for ground contact

1″ x 8″ #2 Pressure Treated Southern Yellow Pine, .15 MCA

Lengths: 12′, 16′

Recommended for most general construction use where moderately high design values are required. Allows well-spaced knots. Ideal for decks, exterior trim, fencing, and other uses.

• Nominal Dimensions: 1″ x 8″
• Actual Dimensions: 3/4″ x 7-1/4″
• #2 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

2″ x 4″ #2 Pressure Treated Lumber, .15 MCA

Lengths: 10′, 12′, 16′

Recommended for most general construction use where moderately high design values are required. Allows well-spaced knots. Ideal for a variety of applications, including decks, walkways, landscaping, and other outdoor projects.

• Nominal Dimensions: 2″ x 4″
• Actual Dimensions: 1-1/2″ x 3-1/2″
• #2 Grade Southern Yellow Pine
• .15 MCA rated for ground contact

2″ x 6″ #2 Pressure Treated Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 16′

Recommended for most general construction use where moderately high design values are required. Allows well-spaced knots. Ideal for a variety of applications, including decks, walkways, landscaping, and other outdoor projects.

• Nominal Dimensions: 2″ x 6″
• Actual Dimensions: 1-1/2″ x 5-1/2″
• #2 Grade Southern Yellow Pine
• .15 MCA rated for ground contact

2″ x 8″ #2 Pressure Treated Lumber, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′

Recommended for most general construction use where moderately high design values are required. Allows well-spaced knots. Ideal for a variety of applications, including decks, walkways, landscaping, and other outdoor projects.

• Nominal Dimensions: 2″ x 8″
• Actual Dimensions: 1-1/2″ x 7-1/4″
• #2 Grade Southern Yellow Pine
• .15 MCA rated for ground contact

2″ x 10″ #2 Pressure Treated Southern Yellow Pine, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′

Pressure-treated to protect from termites, fungal decay, and rot. Ideal for a variety of applications, including decks, playsets, landscaping, walkways, and other outdoor projects where lumber is exposed to the elements. This lumber can be painted or stained after about 6 months. When used properly, it is both safe and environmentally friendly.

• Nominal Dimensions: 2″ x 10″
• Actual Dimensions: 1-1/2″ x 9-1/4″
• #2 Pressure Treated Lumber
• .15 MCA rated for ground contact

2″ x 12″ #2 Pressure Treated Southern Yellow Pine, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′

Recommended for most general construction use where moderately high design values are required. Allows well-spaced knots. Ideal for a variety of applications, including decks, playsets, landscaping, stair support, walkways, and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 2″ x 12″
• Actual Dimensions: 1-1/2″ x 11-1/4″
• #2 Grade Southern Yellow Pine
• .15 MCA rated for ground contact

4″ x 4″ #2 Treated Southern Yellow Pine, .15 MCA

Lengths: 7′, 8′, 10′, 12′, 14′, 16′

Pressure-treated to protect from fungal decay, rot, and termites. Ideal for decks, play sets, landscaping, stair support, walkways and other outdoor projects where lumber is exposed to the elements.

• Nominal Dimensions: 4″ x 4″
• Actual Dimensions: 3-1/2″ x 3-1/2″
• #2 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

4″ x 6″ #2 Treated Pine Timber, .15 MCA

Lengths: 7′, 8′, 10′, 12′, 14′, 16′, 20′

Pressure-treated to protect from fungal decay, rot, and termites. Ideal for a variety of applications, including decks, landscaping, and other outdoor projects

• Nominal Dimensions: 4″ x 6″
• Actual Dimensions: 3-1/2″ x 5-1/2″
• #2 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

6” x 6” #2 Treated Pine Timber, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′

Pressure-treated to protect from fungal decay, rot, and termites. Ideal for a variety of applications, including retaining walls, deck, play sets, landscaping, stair support posts, and walkways.

• Nominal Dimensions: 6″ x 6″
• Actual Dimensions: 5-1/2″ x 5-1/2″
• #2 Pressure Treated Southern Yellow Pine
• .15 MCA rated for ground contact

6″ x 8″ x 8′ Pressure Treated SYP, Rough 2 Sides, Ground Contact

Length: 8′

This #2 & better grade treated timber is approved for ground contact and rough sawn.

• Dimensions: 6′ x 8′
• Pressure Treated
• Smooth on two sides, rough-sawn on two sides
• Approved for ground contact

8” x 8” #2 Treated Rough Sawn Timber, .15 MCA

Lengths: 8′, 10′, 12′, 14′, 16′, 20′

Pressure-treated to protect from fungal decay, rot, and termites. Can be used for porch and deck supports when a large timber is needed. Also used for pole barns.

• Nominal Dimensions: 8″ x 8″
• Actual Dimensions: 8″ x 8″
• #2 Pressure Treated Southern Yellow Pine – Rough Sawn
• .15 MCA rated for ground contact
• Use Hot-Dipped Galvanized, Stainless Steel, or Coated Fasteners