Put the finishing touches on your home or update your style with our selection of trim & mouldings! Whether you want to add crown moulding or chair rail to add a classic look, finish the outside of a door with mouldings and stops, or another use, we have a wide selection available. Cardinal offers both natural and primed trim, and some options are available by the foot.

Can’t find a trim option? Submit a quote below – we may be able to special order it!

Balusters

1-1/4" x 1-1/4" Primed Baluster

1-1/4″ x 1-1/4″ Primed Baluster

Lengths: 8′, 9′, 10′, 11′, 12′, 13′, 14′, 15′, 16′

1-1/4″ Pine Square Baluster is primed and ready to finish with paint or stains. It has a square profile and is made for interior use from 100% pine wood. For best results, use plowed rail for the installation of square top balusters.

  • Dimensions: 1-1/4″ x 1-1/4″
  • Made of pine
  • Primed surfaces can be painted or stained
  • Square design
  • For indoor use only
1-1/2" x 3-1/2" Primed Top Rail Moulding

1-1/2″ x 3-1/2″ Primed Top Rail Moulding

Lengths: 8′, 12′

Top rail mouldings are used with balusters to create rail systems traditionally found at the entryways of buildings.

  • Dimensions: 1-1/2″ x 3-1/2″
  • Made of pine
  • Primed
  • Top mould

1-1/2″ x 3-1/2″ Primed Bottom Rail Moulding

Lengths: 8′, 12′

Bottom rail mouldings are used with balusters to create rail systems traditionally found at the entryways of buildings.

  • Dimensions: 1-1/2″ x 3-1/2″
  • Made of pine
  • Primed
  • Bottom mould

Bases & Floor Trim

9/16” x 3-1/4” Clear Pine Base

9/16″ x 3-1/4″ Clear Pine Base

Base is the perfect addition to dress up any room and cover any imperfections where the floor and wall meet. Also, use Base Moulding as a starting point for more elaborate built-up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 9/16″ x 3-1/4″
  • Made of pine
  • Smooth, consistent surface is factory finished for easy installation
  • Simply nail to the wall and fill the holes for a perfect installation
  • Durable finish is resistant to scratches and dents
  • A great foundation for any room, can be paired with any style of casing
  • Installs with standard woodworking tools
  • For interior use only
9/16” x 3-1/4” Clamshell Clear Pine Base

9/16″ x 3-1/4″ Clamshell Clear Pine Base

Base is the perfect addition to dress up any room. It is used to cover any imperfections where the floor and wall meet. Also, use Base Moulding as a starting point for more elaborate built-up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 9/16″ x 3/4″
  • Made of pine
  • Smooth, consistent surface is factory finished for easy installation
  • Simply nail to the wall and fill the holes for a perfect installation
  • Durable finish is resistant to scratches and dents
  • A great foundation for any room, can be paired with any style of casing
  • Installs with standard woodworking tools
  • For interior use only
11/16” x 11/16” Clear Pine Quarter Round Moulding

11/16″ x 11/16″ Clear Pine Quarter Round Moulding

Clear Pine Quarter Round makes a great transition between base moulding and flooring. It can also cover gaps where flooring surfaces meet base moulding, and covers small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 11/16″ x 11/16″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Classic small profile moulding useful in covering small gaps
  • Can also be used to accent shelving, cabinets, or any other interior elements
  • Installs with standard woodworking tools
7/16” x 3/4" Bare Pine Shoe Moulding

7/16″ x 3/4″ Bare Pine Shoe Moulding

Bare Pine Base Shoe makes a great transition between base moulding and flooring. Pine WM127 Base Shoe can also be used to cover gaps where flooring surfaces meet base moulding. Base Shoe can cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 7/16″ x 3/4″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
11/16" x 11/16" Oak Quarter Round Moulding

11/16″ x 11/16″ Oak Quarter Round Moulding

Oak WM 106 Quarter Round makes a great transition between base moulding and flooring. Solid pine quarter round can also be used to cover gaps where flooring surfaces meet base moulding. Quarter round is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 11/16″ x 11/16″
  • Smooth, consistent surface is free from knots
  • Can be stained or painted with any high-quality latex or oil-based paint and stain
  • Classic small profile moulding useful in covering small gaps
  • Can also be used to accent shelving, cabinets, or any other interior elements
11/16" x 1-1/8" Poplar Base Cap

11/16″ x 1-1/8″ Poplar Base Cap

Base Caps are typically installed on top of a baseboard to create a larger and more distinguished appearance. They can also be placed on top of a flat board for a simple way to create your baseboard. Installing a base cap is a great way to cover up inconsistent painting between the walls and baseboard. They are also used as versatile panel mouldings for your craft projects.

  • Dimensions: 11/16″ x 1-1/8″
  • Easily installs with common woodworking tools
  • Wood mouldings are easily cut
1-1/4" x 1-1/4" Full Round Pole Moulding

1-1/4″ x 1-1/4″ Full Round Pole Moulding

Clear pine mouldings are an excellent choice when looking for budget-friendly material that can be stained or painted. They are easy to cut and install using basic woodworking tools common to most homes.

  • Dimensions: 1-1/4″ x 1-1/4″
  • Easily installs with common woodworking tools
  • Clear pine mouldings represent a great value
  • Solid pine has a smooth grain that is easy to paint or stain
7/16" x 3/4" Oak Shoe Moulding

7/16″ x 3/4″ Oak Shoe Moulding

WM127 Oak Base Shoe makes a great transition between base moulding and flooring. Oak WM127 Base Shoe can also be used to cover gaps where flooring surfaces meet base moulding. Base Shoe is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 7/16″ x 3/4″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
3/8" x 11/16" Half-Round Moulding

3/8″ x 11/16″ Half-Round Moulding

A half-round is typically applied to the edge of a board or shelf to give the appearance of a smooth rounded edge. This could be for decorative purposes or to protect against sharp board edges. Half rounds are also nailed or glued to panels to create a raised look and add depth to your walls or crafts.

  • Dimensions: 3/8″ x 11/16″
  • A durable pine substrate that has workability similar to solid pine
  • Paint grade pine – prime and paint
  • Excellent workability
  • Will create a rounded edge when applied to a square edge
  • Moulding installs in a snap using brad nails
1-1/16” x 1-1/16” Pine Quarter Round Moulding

1-1/16″ x 1-1/16″ Pine Quarter Round Moulding

Solid Pine WM 103 Quarter Round makes a great transition between base moulding and flooring. Solid Pine WM 103 Quarter Round can also cover gaps where flooring surfaces meet base moulding and cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 1-1/16″ x 1-1/16″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can also be used to accent shelving, cabinets, or any other interior elements
  • Installs with standard woodworking tools
7/16” x 3/4" x 16’ Primed Pine Shoe Moulding

7/16″ x 3/4″ x 16′ Primed Pine Shoe Moulding

WM 127 Base Shoe makes a great transition between base moulding and flooring. Primed Finger-Jointed Pine WM 127 Base Shoe also covers gaps where flooring surfaces meet base moulding. Base Shoe covers small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 7/16′ x 3/4″
  • Length: 16′
  • Surface may have knots
  • Can be painted with any high-quality latex-based paint
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
1/2" x 3/4" Clear Pine Shoe Moulding

1/2″ x 3/4″ Clear Pine Shoe Moulding

Clear Base Shoes are an easy way to finish off your baseboard project professionally. Base shoes are installed at the foot of a baseboard moulding for two reasons. They extend the amount of flooring covered by the moulding in case the flooring was cut back too short. Secondly, they cover up gaps created by unevenness between the floor and the baseboard. Base Shoes are flexible and will follow the contour of the flooring material.

  • Dimensions: 1/2″ x 3/4″
  • Sold by the foot
  • Offers natural beauty and are easily cut
  • Nailed in place using common finishing nails
11/16” x 5-1/4" x 16’ FJ Primed Speed Base Moulding

11/16″ x 5-1/4″ x 16’ FJ Primed Speed Base Moulding

WM 163E Primed base is the perfect addition to dress up any room. WM 163E base is used to cover any imperfections where the floor and wall meet. Use Base Moulding as a starting point for more elaborate built up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 11/16′ x 5-1/4″
  • Length: 16′
  • Smooth, consistent pre-primed surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex or oil-based paint
  • A great foundation for any room, can be paired with any style of casing
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
9/16" x 3-1/2" x 16’ Primed Pine Base

9/16″ x 3-1/2″ x 16’ Primed Pine Base

The 9/16″ x 3-1/2″ Primed Pine Casing enhances the character of any room opening by encasing the area around doors or windows where the frame meets the drywall. It hides gaps and breathes life into your room, and is easy to work with.

  • Dimensions: 9/16″ x 3-1/2″
  • Length: 16′
  • Stain grade pine – use your favorite stain
  • Excellent workability
  • Use for trimming inside and outside window and door openings
  • Moulding installs in a snap using brad nails
9/16” x 4-1/4" x 16’ Finger-Jointed Primed Pine Base

9/16″ x 4-1/4″ x 16′ Finger-Jointed Primed Pine Base

Primed Finger-Jointed WM620 Base is used to cover any imperfections where floor and wall meet. This base can also be used as a starting point for more elaborate built up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 9/16″ x 4-1/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots
  • Can be painted with any high-quality latex or oil-based paint
  • Can be paired with a matching casing and crown for a more unified look
  • A classic pattern that works with any style
9/16” x 3-1/4" x 16’ Finger-Jointed Primed Colonial Base

9/16″ x 3-1/4″ x 16′ Finger-Jointed Primed Colonial Base

WM 623 Colonial base is the perfect addition to dress up any room. Used to cover any imperfections where the floor and wall meet. Also, use Base Moulding as a starting point for more elaborate built up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 9/16″ x 3-1/4″
  • Length: 16′
  • Smooth, consistent surface is factory finished for easy installation
  • Simply nail to the wall and fill the holes for a perfect installation
  • Durable finish is resistant to scratches and dents
  • A great foundation for any room, can be paired with any style of casing
  • Installs with standard woodworking tools
  • For interior use only
9/16” x 4-1/4" x 16’ Finger-Jointed Primed Base Mould

9/16″ x 4-1/4″ x 16′ Finger-Jointed Primed Base Mould

Base mouldings are applied where walls meet floors. Base mouldings are a beautiful way to hide uneven walls and floors where they meet. Mouldings create a foundation for walls and give any room that well-grounded look, visually making walls look well set and stable. Creates a built-up, larger-than-life feel when used with a base cap and a base shoe. Base mouldings are also perfect for covering up uneven flooring edges.

  • Dimensions: 9/16″ x 4-1/4″
  • Length: 16′
  • Easy to install
  • Beaded
  • Classic style
  • Pre-primed
9/16” x 5-1/4" x 16’ Finger-Jointed Primed Base Mould

9/16″ x 5-1/4″ x 16′ Finger-Jointed Primed Base Mould

Base mouldings are applied where walls meet floors. Base mouldings are a beautiful way to hide uneven walls and floors where they meet. Mouldings create a foundation for walls and give any room that well-grounded look, visually making walls look well set and stable. Creates a built-up, larger than life feel when used with a base cap and a base shoe. Base mouldings are also perfect for covering up uneven flooring edges.

  • Dimensions: 9/16″ x 5-1/4″
  • Length: 16′
  • Easy to install
  • Beaded
  • Classic style
  • Pre-primed
9/16" x 3-1/4" x 16' Primed Bead Base

9/16″ x 3-1/4″ x 16′ Primed Bead Base

Base measures 9/16″ x 3-1/4″ x 16′.

  • Primed
  • Solid
7/16” x 11/16” Pine Shoe Moulding

9/16″ x 3-1/4″ x 16′ Primed Bead Base

WM 129 Pine Base Shoe makes a great transition between base moulding and flooring. Pine WM 129 Base Shoe can also be used to cover gaps where flooring surfaces meet base moulding. Base Shoe is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 7/16″ x 11/16″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
1/2" x 3/4" Oak Shoe Moulding

1/2″ x 3/4″ Oak Shoe Moulding

WM 126 Oak Base Shoe makes a great transition between base moulding and flooring. Can also be used to cover gaps where flooring surfaces meet base moulding. Base Shoe is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 1/2″ x 3/4″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
7/16” x 11/16” Clear Pine Shoe Moulding

7/16″ x 11/16″ Clear Pine Shoe Moulding

WM 129 Pine Base Shoe makes a great transition between base moulding and flooring. Pine WM 129 Base Shoe can also be used to cover gaps where flooring surfaces meet base moulding. Base Shoe is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 7/16″ x 11/16″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
11/16” x 1-3/8" x 12’ Pine Base Cap

11/16″ x 1-3/8″ x 12′ Pine Base Cap

Solid Pine WM 163 Base Cap moulding is used to accent square baseboards around floors and stairs. This versatile moulding can also be used to create panels sometimes referred to as “judge’s panels” on vertical walls to add visual interest. Base cap can also be used as a panel cap to give wainscot a more finished look.

  • Dimensions: 11/16″ x 1-3/8″
  • Length: 12′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
9/16” x 3-1/4" x 16’ Finger-Jointed Primed Base Moulding

9/16″ x 3-1/4″ x 16′ Finger-Jointed Primed Base Moulding

Primed Finger-Jointed WM 663 base is the perfect addition to dress up any room. WM 663 base is used to cover any imperfections where the floor and wall meet. Base Moulding can also be used as a starting point for more elaborate built up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 9/16″ x 3-1/4″
  • Length: 16′
  • Smooth, consistent pre-primed surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex or oil-based paint
  • A great foundation for any room, can be paired with any style of casing
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
11/16” x 1-3/8” x 16’ Finger-Jointed Primed Base Cap Moulding

11/16″ x 1-3/8″ x 16′ Finger-Jointed Primed Base Cap Moulding

WM163 Prime Finger-Jointed Base Cap moulding is designed to be used to accent square baseboards around floors and stairs. This versitable moulding can also be used to create panels sometimes referred to as “judges panels” on vertical walls to add visual interest. Base cap can also be used as a panel cap to give wainscot a more finished look.

  • Dimensions: 11/16″ x 1-3/8″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
11/16” x 2-1/4” x 16’ Finger-Jointed Primed Beaded Base Moulding

11/16″ x 2-1/4″ x 16′ Finger-Jointed Primed Beaded Base Moulding

WM 753 Primed Finger-Jointed Casing is used around doors and windows to cover the gaps between the frames and walls. This is the finishing touch on any window and door. You can combine casing with a back band to create a bold one-of-a-kind look.

  • Dimensions: 11/16″ x 2-1/4″
  • Length: 16′
  • Smooth, consistent pre-primed surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex or oil-based paint
  • A great foundation for any room, can be paired with any style of casing
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
  • For interior use only
9/16” x 3-1/4" x 16’ Finger-Jointed Primed Colonial Base

9/16″ x 3-1/4″ x 16′ Finger-Jointed Primed Colonial Base

WM 623 Colonial base is the perfect addition to dress up any room. Used to cover any imperfections where the floor and wall meet. Also, use Base Moulding as a starting point for more elaborate built up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 9/16″ x 3-1/4″
  • Length: 16′
  • Smooth, consistent surface is factory finished for easy installation
  • Simply nail to the wall and fill the holes for a perfect installation
  • Durable finish is resistant to scratches and dents
  • A great foundation for any room, can be paired with any style of casing
  • Installs with standard woodworking tools
  • For interior use only
9/16” x 4-1/4" x 16’ Finger-Jointed Primed Base Moulding

9/16″ x 4-1/4″ x 16′ Finger-Jointed Primed Base Moulding

Primed Finger-Jointed WM620 Base is used to cover any imperfections where floor and wall meet. Also, use base moulding as a starting point for more elaborate built up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 9/16″ x 4-1/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots
  • Can be painted with any high-quality latex or oil-based paint
  • Can be paired with a matching casing and crown for a more unified look
  • A classic pattern that works with any style
1/2" x 3/4" x 16’ Finger-Jointed Primed Shoe Moulding

1/2″ x 3/4″ x 16’ Finger-Jointed Primed Shoe Moulding

WM 126 FJ Primed Pine Base Shoe makes a great transition between base moulding and flooring. WM 126 FJ Primed Pine Base Shoe can also be used to cover gaps where flooring surfaces meet base moulding. Base Shoe is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 1/2″ x 3/4″
  • Length: 16′
  • Surface may have knots
  • Can be painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
3/4" x 3/4" x 13’ Quarter Round Moulding

3/4″ x 3/4″ x 13′ Quarter Round Moulding

WM 106 Quarter Round makes a great transition between base moulding and flooring. It can also cover gaps where flooring surfaces meet base moulding. Quarter round is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 3/4″ x 3/4″
  • Length: 13′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Classic small profile moulding useful in covering small gaps
  • Can also be used to accent shelving, cabinets, or any other interior elements
  • Installs with standard woodworking tools
1-1/8" x 11/16" x 14’ Pine Base Cap Moulding

1-1/8″ x 11/16″ x 14′ Pine Base Cap Moulding

WM167 Pine Base Cap Moulding installs on top of a baseboard to create a decorative finishing touch. The base cap is also suitable for various other paneling projects. This moulding is perfect for the do-it-yourself homeowner and adds the final touches needed to finish any room or project.

  • Dimensions: 1-1/8″ x 11/16″
  • Length: 14′
  • Can paint or stain solid pine to match any decor
  • Simple yet refined profile design adds classic style
  • Covers uneven flooring edges
  • Add to a baseboard for a finished decorative look
  • Use as an accent below a crown
  • Can be stacked
  • Install using a miter saw
9/16” x 3-1/4” x 16’ Pine Ranch Base

9/16″ x 3-1/4″ x 16′ Pine Ranch Base

WM 713 Pine base is the perfect addition to dress up any room. The Pine WM 713 base is used to cover any imperfections where the floor and wall meet. Base Moulding can also be used as a starting point for more elaborate built up baseboards. Combining other mouldings with this base can create looks that range from classic to elegant.

  • Dimensions: 9/16″ x 3-1/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
3/4" x 3/4" x 16’ Finger-Jointed Primed Quarter Round

3/4″ x 3/4″ x 16’ Finger-Jointed Primed Quarter Round

Primed Finger-Jointed Pine Quarter Round Moulding adds a finishing touch to anything from walls to cabinetry. It is commonly used as an embellishment to existing structures and moulding applications. It is typically installed inside corners where two surfaces meet at 90 degrees. This is one of the most common mouldings used in crafts and home projects.

  • Dimensions: 3/4″ x 3/4″
  • Length: 16′
  • Easily installs with common woodworking tools
  • Wood mouldings are easily cut
  • Painted white – ready to install
3/4" x 3/4" x 16’ Finger-Jointed Primed Quarter Round

3/4″ x 3/4″ Oak Quarter Round

Quarter Round Moulding adds a finishing touch to anything from walls to cabinetry. It is commonly used as an embellishment to existing structures and moulding applications. It is typically installed on an inside corner where two surfaces meet at 90 degrees. This is one of the most common mouldings used in crafts and home projects.

  • Dimensions: 3/4″ x 3/4″
  • Easily installs with common woodworking tools
  • Wood mouldings are easily cut
  • Painted white – ready to install
1/2" x 3/4" Pine Shoe Moulding

1/2″ x 3/4″ Pine Shoe Moulding

WM 126 Pine Base Shoe makes a great transition between base moulding and flooring. Can also be used to cover gaps where flooring surfaces meet base moulding. Base Shoe is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 1/2″ x 3/4″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
11/16" x 4-5/8" x 7’ Clear Pine Flat Jamb Side

11/16″ x 4-5/8″ x 7’ Clear Pine Flat Jamb Side

Pine Door Jamb Moulding is ready to be painted to match your decor. It is a sturdy jamb that will last for years. This jamb is designed for interior use only and can be painted to match your other interior decor.

  • Dimensions: 11/16″ x 4-5/8″
  • Length: 7′
  • Pine construction
  • Ready for paint
  • For interior use
  • Resistant to rot
11/16" x 4-5/8" x 7’ Clear Pine Flat Jamb Side

11/16″ x 4-5/8″ x 7′ Finger-Jointed Primed Flat Jamb Side

Finger Jointed Primed Pine Door Jamb Moulding is ready to be painted to match your decor. It is an economical, yet sturdy jamb that will last for years. This jamb is designed for interior use only and can be painted to match your other interior decor.

  • Dimensions: 11/16″ x 4-5/8″
  • Height: 7′
  • Pine construction
  • FJ Primed
  • Ready for paint
  • For interior use
  • Resistant to rot
11/16" x 4-5/8" x 7’ Clear Pine Flat Jamb Side

11/16″ x 6-5/8″ x 7′ Finger-Jointed Primed Flat Jamb Side

Finger Jointed Primed Pine Door Jamb Moulding is ready to be painted to match your decor. It is an economical yet sturdy jamb that will last for years. This jamb is designed for interior use only and can be painted to match your other interior decor.

  • Dimensions: 11/16″ x 6-5/8″
  • Height: 7′
  • Pine construction
  • FJ Primed
  • Ready for paint
  • For interior use
  • Resistant to rot
11/16" x 3/4" x 15' Casing Column

11/16″ x 3/4″ x 16′ Casing Column

Casing is used around doors and windows to cover the gaps between the frames and walls. WM 445 Casing is the finishing touch on any window and door. You can combine casing with a backband to create a bold one-of-a-kind look.

  • Dimensions: 11/16″ x 3-1/4″
  • Length: 16′
  • Smooth, consistent surface is factory finished for easy installation
  • Simply nail to the wall and fill the holes for a perfect installation
  • Durable finish is resistant to scratches and dents
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
  • For interior use only
11/16" x 2-1/4" x 14’ Finger-Jointed Primed Colonial Door Casing

11/16″ x 2-1/4″ x 14′ Finger-Jointed Primed Colonial Door Casing

WM 376 Prime Finger-Jointed Casing is used around doors and windows to cover the gaps between the frames and walls. Prime Finger-Jointed WM 376 Casing is the finishing touch on any window and door. You can combine casing with a back band to create a bold one of a kind look.

  • Dimensions: 11/16″ x 2-1/4″
  • Length: 14′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
11/16" x 2-1/4" x 15’ Solid Pine Colonial Door Casing

11/16″ x 2-1/4″ x 15′ Solid Pine Colonial Door Casing

WM 376 Pine Casing is used around doors and windows to cover the gaps between the frames and walls. Pine WM 376 Casing is the finishing touch on any window and door. You can combine casing with a back band to create a bold, one-of-a-kind look.

  • Dimensions: 11/16″ x 2-1/4″
  • Length: 15′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
1-1/16” x 3-1/2” x 16’ Finger-Jointed Primed Adams Casing Moulding

1-1/16″ x 3-1/2″ x 16′ Finger-Jointed Primed Adams Casing Moulding

Primed Finger-Joint Mouldings are an excellent choice when looking for budget-friendly material that can be painted. Use casings to frame interior and exterior windows and doors. Casings are great for covering up uneven joints where walls meet doors and windows. Casings can create an opening frame that draws attention and brings beauty to any door or window. Casings can also be used for picture frames when mitered and painted with decorative finishes.

  • Dimensions: 1-1/16″ x 3-1/2″
  • Length: 16″
  • Elegant wide casing for doors or windows
  • Pre-primed
  • Ready to paint
  • Easy to install
  • Creates a decorative frame around doors and windows
11/16" x 2-1/4" x 16’ Pine Ranch Casing

11/16″ x 2-1/4″ x 16′ Pine Ranch Casing

WM327 Pine Ranch Casing is used around doors and windows to cover the gaps between the frames and walls. WM327 Pine Ranch Casing is the finishing touch on any window and door. You can combine casing with a backband to create a bold, one-of-a-kind look.

  • Dimensions: 11/16″ x 2-1/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
3/8" x 1-1/2" x 16’ Pine Mullion Casing

3/8″ x 1-1/2″ x 16′ Pine Mullion Casing

Donned over transitional spaces to mask joints to give the illusion of seamless construction. Unattractive seams or blemishes can be miraculously hidden, creating a patterned look to your application. Sometimes called Panel Strips, these mouldings are applied over window jamb edges in a multiple-opening window. Mullion strips are also used for decorative wall treatments.

  • Dimensions: 3/8″ x 1-1/2″
  • Length: 16′
  • Offers natural beauty and are easily cut
  • Nailed in place using common finishing nails
  • A thin strip of moulding used to conceal seams
  • Moulding installs in a snap using brad nails
9/16" x 3-1/2" Sanitary Casing

9/16″ x 3-1/2″ Sanitary Casing

Casing enhances the character of any room opening by encasing the area around doors or windows where the frame meets the drywall. It hides gaps and breathes life into your room. This casing is easy to work with. Can paint or stain as desired.

  • Dimensions: 9/16″ x 3-1/2″
  • Excellent workability
  • Use for trimming inside and outside window and door openings
  • Moulding installs in a snap using brad nails
11/16" x 2-1/4" Clear Pine Casing

11/16″ x 2-1/4″ Clear Pine Casing

Casing is used around doors and windows to cover the gaps between the frames and walls. WM 376 Casing is the finishing touch on any window and door. You can combine casing with a backband to create a bold one of a kind look.

  • Dimensions: 11/16″ x 2-1/4″
  • Smooth, consistent surface is factory finished for easy installation
  • Simply nail to the wall and fill the holes for a perfect installation
  • Durable finish is resistant to scratches and dents
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
  • For interior use only
11/16" x 2-1/4" Clear Pine Clam Casing

11/16″ x 2-1/4″ Clear Pine Clam Casing

Casing is used around doors and windows to cover the gaps between the frames and walls. WM 327 Casing is the finishing touch on any window and door. You can combine casing with a back band to create a bold, one-of-a-kind look.

  • Dimensions: 11/16″ x 2-1/4″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
11/16" x 3-1/4" Clear Pine Casing

11/16″ x 3-1/4″ Clear Pine Casing

Casing is used around doors and windows to cover the gaps between the frames and walls. WM 376 Casing is the finishing touch on any window and door. You can combine casing with a back band to create a bold, one-of-a-kind look.

  • Dimensions: 11/16″ x 3-1/4″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
11/16" x 2-1/4” x 14’ Finger-Jointed Primed Pine Casing

11/16″ x 2-1/4″ x 14′ Finger-Jointed Primed Pine Casing

WM 376 Prime Finger-Jointed Casing is used around doors and windows to cover the gaps between the frames and walls. Prime Finger-Jointed WM 376 Casing is the finishing touch on any window and door. You can combine casing with a back band to create a bold, one-of-a-kind look.

  • Dimensions: 11/16″ x 2-1/4″
  • Length: 14′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
11/16" x 3-1/4" x 16’ Finger-Joined Primed Casing

11/16″ x 3-1/4″ x 16′ Finger-Joined Primed Casing

WM 445 Primed Finger-Jointed Casing is used around doors and windows to cover the gaps between the frames and walls. Primed Finger-Jointed WM 445 Casing is the finishing touch on any window and door. You can combine casing with a backband to create a bold, one-of-a-kind look.

  • Dimensions: 11/16″ x 3-1/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
3/8" x 1-1/8" Beaded Mull Casing

3/8″ x 1-1/8″ Beaded Mull Casing

WM 959 Mull Casing adds architectural interest to your walls. WM 959 Mull Casing is used to create two separate spaces on a wall allowing two finishes with clean lines. The chair rail also has the added benefit of protecting your walls from marks caused by chairs.

  • Dimensions: 3/8″ x 1-1/8″
  • Sold by the foot
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Installs with standard woodworking tools
  • An easy way to add visual interest to any interior wall
1-1/16” x 3-1/2" x 16’ Finger-Jointed Primed Adams Casing

1-1/16″ x 3-1/2″ x 16′ Finger-Jointed Primed Adams Casing

Casing mouldings are installed around the inside of window units and on both sides of door units. Casing mouldings cover the joint between the jamb of the door or window and the house framing.

  • Dimensions: 1-1/16″ x 3-1/2″
  • Length: 16′
  • Finger-joint materials are an economical choice
  • Pre-primed and ready to accept a high-quality latex paint
  • Installs with standard woodworking tools

Chair Rails & Walls

1-1/16” x 3” x 16’ Finger-Jointed Primed Chair Rail

1-1/16″ x 3″ x 16′ Finger-Jointed Primed Chair Rail

Chair rails have traditionally been used to protect the wall from marks caused by chairs. They are installed a third the way up the wall, effectively creating two separate spaces on a wall allowing two finishes with clean lines. Chair Rails are an easy way to add architectural interest to your walls.

  • Dimensions: 1-1/16″ x 3″
  • Length: 16′
  • A durable pine substrate that has workability similar to solid pine
  • Primed surface – ready to paint
  • Coated with a high hide water-based primer allowing for superior paint adherence
  • Use to protect walls from chairs or as a wainscoting cap
  • Moulding installs in a snap using brad nails
7/16” x 4-1/4" x 16’ Finger-Jointed Primed Backer Bead

7/16″ x 4-1/4″ x 16′ Finger-Jointed Primed Backer Bead

WM 956WW FJ Primed Pine Chair Rail Backer is typically installed behind a Chair Rail Moulding to give a larger, more elegant appearance. It emphasizes the chair rail, making it appear more of a focal point of the room. Chair Rail Backers are often used in larger rooms where a chair rail itself would look small.

  • Dimensions: 7/16″ x 4-1/4″
  • Length: 16′
  • A durable pine substrate that has workability similar to solid pine
  • Primed surface – ready to paint
  • Coated with a high hide water-based primer allowing for superior paint adherence
  • Moulding installs in a snap using brad nails
11/16" x 2-5/8" x 16’ Finger-Jointed Primed Chair Rail

11/16″ x 2-5/8″ x 16′ Finger-Jointed Primed Chair Rail

Primed WM 390 Chair Rail adds architectural interest to your walls. Primed chair rail creates two separate spaces on a wall allowing two finishes with clean lines. The chair rail also has the added benefit of protecting your walls from marks caused by chairs.

  • Dimensions: 11/16″ x 2-5/8″
  • Length: 16′
  • Smooth, consistent surface is free from knots
  • Can be painted with any high-quality latex or oil-based paint
  • An easy way to add visual interest to any interior wall
  • A classic pattern that works with any style
9/16" x 1-1/8" Pine Panel Moulding

9/16″ x 1-1/8″ Pine Panel Moulding

WM 183 Pine Panel Moulding is ideal for covering rough edges in exposed areas of plywood. It is a versatile profile and can be used for top edging of Wainscoting or paneling, screen moulding, shoe moulding, or a variety of other projects. It is manufactured with solid pine and can be stained to the desired color.

  • Dimensions: 9/16″ x 1-1/8″
  • Beautiful wood grain with a rustic flair
  • Stain grade pine – use your favorite stain
  • Excellent workability
  • Covers the rough edge of a wainscot or plywood
  • Moulding installs in a snap using brad nails

11/16″ x 1-1/8″ Solid Pine Backband Moulding

WM281 Pine backband is the perfect addition to dress up any casing. Can be installed with existing casing to add more detail and depth to a simple casing pattern.

  • Dimensions: 11/16″ x 1-1/8″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Backband can be used to dress up square edges boards too
  • Can also be used to accent shelving, cabinets, or any other interior elements
  • Installs with standard woodworking tools

Crown Mouldings

9/16" x 2-5/8" x 16' Finger-Jointed Primed Crown Moulding

9/16″ x 2-5/8″ x 16′ Finger-Jointed Primed Crown Moulding

WM 53 9/16″ x 2-5/8″ Primed Finger-jointed Pine Crown Moulding adds character and tone to a room through its ornate pattern of the crown. It is installed where a ceiling meets a wall to soften the transition between awkward angles. It also is used to conceal uneven edges. Crown mouldings come in a variety of sizes and patterns and can be combined to create one-of-a-kind moulding build-ups.

  • Dimensions: 9/16″ x 2-5/8″
  • Length: 16′
  • A durable pine substrate that has workability similar to solid pine
  • Primed surface – ready to paint
  • Coated with a high hide water-based primer allowing for superior paint adherence
  • Apply where walls meet ceilings to enhance interior spaces
  • Moulding installs in a snap using brad nails
9/16" x 2-5/8" x 16' Pine Crown Moulding

9/16″ x 2-5/8″ x 16′ Pine Crown Moulding

WM 53 9/16″ x 2-5/8″ Pine Crown Moulding adds character and tone to a room through its ornate pattern of the crown. It is installed where a ceiling meets a wall to soften the transition between awkward angles. It also is used to conceal uneven edges. Crown mouldings come in a variety of sizes and patterns and can be combined to create one-of-a-kind moulding build-ups.

  • Dimensions: 9/16″ x 2-5/8″
  • Length: 16′
  • A durable pine substrate that has workability similar to solid pine
  • Coated with a high hide water-based primer allowing for superior paint adherence
  • Apply where walls meet ceilings to enhance interior spaces
  • Moulding installs in a snap using brad nails
9/16" x 3-5/8" x 16' Finger-Jointed Primed Crown Moulding

9/16″ x 3-5/8″ x 16′ Finger-Jointed Primed Crown Moulding

WM 49 9/16″ x 2-5/8″ x 16′ Primed Finger-jointed Pine Crown Moulding adds character and tone to a room through its ornate pattern of the crown. It is installed where a ceiling meets a wall to soften the transition between awkward angles. It also is used to conceal uneven edges. Crown mouldings come in a variety of sizes and patterns and can be combined to create one of a kind moulding build-ups.

  • Dimensions: 9/16″ x 3-5/8″
  • Length: 16′
  • A durable pine substrate that has workability similar to solid pine
  • Primed surface – ready to paint
  • Coated with a high hide water-based primer allowing for superior paint adherence
  • Apply where walls meet ceilings to enhance interior spaces
  • Moulding installs in a snap using brad nails
9/16" x 3-5/8" x 12' Pine Crown Moulding

9/16″ x 3-5/8″ x 12′ Pine Crown Moulding

WM 49 9/16″ x 2-5/8″ x 16′ Pine Crown Moulding adds character and tone to a room through its ornate pattern of the crown. Installed where a ceiling meets a wall to soften the transition between awkward angles. It also is used to conceal uneven edges. Crown mouldings come in a variety of sizes and patterns and can be combined to create one-of-a-kind moulding build-ups.

  • Dimensions: 9/16″ x 3-5/8″
  • Length: 12′
  • A durable pine substrate that has workability similar to solid pine
  • Coated with a high hide water-based primer allowing for superior paint adherence
  • Apply where walls meet ceilings to enhance interior spaces
  • Moulding installs in a snap using brad nails
9/16" x 4-5/8" x 16' Finger-Jointed Primed Crown Moulding

9/16″ x 4-5/8″ x 16′ Finger-Jointed Primed Crown Moulding

WM47 Finger-Jointed Primed Crown Moulding is used where walls meet ceilings. WM47 Crown Moulding is the best way to add interest to any room or space.

  • Dimensions: 9/16″ x 4-5/8″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Installs with standard woodworking tools
  • Can be used to create mantels or cornices
9/16" x 5-1/4" x 16' Finger-Jointed Primed Crown Moulding

9/16″ x 5-1/4″ x 16′ Finger-Jointed Primed Crown Moulding

WM 45 Primed Finger-Jointed Crown Moulding is used where walls meet ceilings. Primed Finger-Jointed WM45 Crown Moulding is the best way to add interest to any room or space.

  • Dimensions: 9/16″ x 5-1/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Installs with standard woodworking tools
  • Can be used to create mantels or cornices
11/16" x 4-1/4" x 16’ Primed Cove

11/16″ x 4-1/4″ x 16′ Primed Cove

Coves are similar to crown mouldings and are installed on an inside corner. Due to their small size, they are ideal when you need a quality, low-profile moulding to hide any gaps in your corner. They can also be used in conjunction with other mouldings to create more elaborate creations.

  • Dimensions: 11/16″ x 4-1/4″
  • Length: 16′
  • Finger-jointed pine has workability similar to solid pine
  • Primed surface – ready to paint
  • Coated with a high hide water-based primer allowing for superior paint adherence
  • Moulding installs in a snap using brad nails
21/32" x 21/32" Pine Cove Moulding

21/32″ x 21/32″ Pine Cove Moulding

WM 100 Clear Pine Cove Moulding is a concave profile used where walls meet ceilings. Prestained Clear Pine WM 100 Cove Moulding is sometimes used in craftsman-style mouldings due to its simple lines.

  • Dimensions: 21/32″ x 21/32″
  • Also used as an inside corner.
  • Smooth, consistent surface is free from knots and is ready to finish
  • Installs with standard woodworking tools
  • Classic small profile moulding useful in covering small gaps
  • Can also be used to accent shelving, cabinets, or any other interior elements
11/16" x 11/16" Pine Outside Corner Moulding

11/16″ x 11/16″ Pine Outside Corner Moulding

WM 206 Pine outside corner moulding protects and covers corners where walls from outside corners or wall coverings and painted surfaces meet. The moulding is sometimes referred to as outside corner guards. The Pine WM 206 outside corner can also be used on shelving boards to prevent items from sliding off.

  • Dimensions: 11/16″ x 11/16″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Use to protect corners where wallpaper meets a painted wall
  • Use to protect outside corners from dents and scratches in high traffic areas
  • Installs with standard woodworking tools
1-1/8" x 1-1/8” Pine Outside Corner Moulding

1-1/8″ x 1-1/8″ Pine Outside Corner Moulding

WM 205 Pine outside corner moulding protects and covers corners where walls from outside corners or wall coverings and painted surfaces meet. The moulding is sometimes referred to as outside corner guards. The Pine WM 205 outside corner can also be used on shelving boards to prevent items from sliding off.

  • Dimensions: 1-1/8″ x 1-1/8″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Use to protect corners where wallpaper meets a painted wall
  • Use to protect outside corners from dents and scratches in high traffic areas
  • Installs with standard woodworking tools

Door Stops & Mouldings

1-1/4" x 2” Vinyl Brick Moulding

1-1/4″ x 2″ Vinyl Brick Moulding

Vinyl Brick Moulding is for indoor or outdoor use and is designed not to rot. The brick moulding has the same profile as traditional bricks and is for use around window and door openings. Adding Brick Moulding to your home adds value and a nice finishing touch.

  • Dimensions: 1-1/4″ x 2″
  • Vinyl is durable and easy to clean
  • The white finish is both paintable and stainable
  • Moisture, rot, and termite resistant
  • Cuts like wood with no special tools required
  • Easily installed with nails or glue
  • Will not split or crack
  • For use around windows and doors
  • Interior or exterior use
1-1/4" x 2” x 17’ Finger-Jointed Primed Brick Moulding

1-1/4″ x 2″ x 17′ Finger-Jointed Primed Brick Moulding

Brick mouldings are installed outside the home around door units and sometimes around window units. Brick mouldings cover the gap between the door or window unit and the adjacent house framing, adding an element of visual interest to any window or door.

  • Dimensions: 1-1/4″ x 2″
  • Length: 17′
  • Primed finger-jointed mouldings are an inexpensive moulding option
  • Finger-jointed pine has workability similar to solid pine
  • Primed surface – ready to paint
  • Coated with a high hide water-based primer, allowing for superior paint adherence
  • Simple profile that eases the transition between siding and doors and windows
1-1/4" x 3-1/4" Primed Williamsburg Brick Moulding

1-1/4″ x 3-1/4″ Primed Williamsburg Brick Moulding

WM 174 Primed Finger-Jointed Brick Mould is used to seal around exterior doors and windows. Primed Finger-Jointed WM 174 Brick Mould helps shield your exterior openings from the elements while protecting from water infiltration. Brick mould always adds an element of visual interest to any window or door.

  • Dimensions: 1-1/4″ x 3-1/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Simple profile that eases the transition between siding and doors/windows – A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
2” x 1-1/4" Primed Brick Moulding

2″ x 1-1/4″ Primed Brick Moulding

Brick mouldings are installed outside the home around door units and sometimes around window units. Brick mouldings cover the gap between the door or window unit and the adjacent house framing, adding an element of visual interest to any window or door.

  • Dimensions: 2″ x 1-1/4″
  • Will not rot, crack, splinter or split
  • Resistant to moisture, no mold, and mildew
  • Impervious to insects
  • Does not require painting if not desired
  • Paint prep is minimal, and no sanding is required
  • Outstanding for exterior or interior use
1/4" x 3/4" x 12’ Pine Screen Bead Moulding

1/4″ x 3/4″ x 12′ Pine Screen Bead Moulding

Pine WM142 Screen Moulding is typically used to cover the seams where window screening meets the frame. Also, use Pine WM142 Screen Moulding to cover seams and transitions between wallpaper and painted walls. Screen mould can also be used to cover the raw edges of plywood.

  • Dimensions: 1/4″ x 3/4″
  • Length: 12′
  • Smooth, consistent surface is free from knots
  • Can be stained or painted with any high-quality latex or oil-based paint and stain
  • Classic small profile moulding useful in covering small gaps
  • Can also be used to accent shelving, cabinets, or any other interior elements
3/8" x 1-5/8" Clear Pine Stop

3/8″ x 1-5/8″ Clear Pine Stop

Clear pine mouldings are an excellent choice when looking for budget-friendly material that can be stained or painted. Clear pine mouldings come in a large variety of profiles that will meet the need whenever a moulding is required. Clear pine mouldings are easy to cut and install using basic woodworking tools common to most homes.

  • Dimensions: 3/8″ x 1-5/8″
  • Easily installs with common woodworking tools
  • Clear pine mouldings represent a great value
  • Solid pine has a smooth grain that is easy to paint or stain
3/8" x 1-3/8" Clear Pine Ranch Stop

3/8″ x 1-3/8″ Clear Pine Ranch Stop

Pine Door Stop is typically applied around doors and windows and applied to the head and side jambs to cover the area where the door or window meets the frame. A doorstop is used to cover the area where the door meets the door frame. It also is used to stop or reduce the swing of a door.

  • Dimensions: 3/8″ x 1-3/8″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Narrow moulding with a classic edge style
  • Can also be used to accent shelving, cabinets, or any other interior elements
  • Installs with standard woodworking tools
3/8" x 7/8" Colonial Clear Pine Stop

3/8″ x 7/8″ Colonial Clear Pine Stop

Pine Door Stop is typically applied around doors and windows and to the head and side jambs to cover the area where the door or window meets the frame. A doorstop is used to cover the area where the door meets the door frame. It also is used to stop or reduce the swing of a door.

  • Dimensions: 3/8″ x 7/8″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Narrow moulding with a classic edge style
  • Can also be used to accent shelving, cabinets, or any other interior elements
  • Installs with standard woodworking tools
3/8" x 1-3/8" Clear Pine Stop Moulding

3/8″ x 1-3/8″ Clear Pine Stop Moulding

WM 946 Door Stop is applied to the head and side jambs to cover the area where the door or window meets the frame. Door stops are used to cover the area where the door meets the door frame. It also is used to stop or reduce the swing of a door.

  • Dimensions: 3/8″ x 1-3/8″
  • Sold per foot
  • Offers natural beauty
  • Are easily cut and nailed in place using common finishing nails
3/8" x 1-3/8" Pine Door Stop Moulding

3/8″ x 1-3/8″ Pine Door Stop Moulding

Solid Pine WM 886 Door Stops are typically applied around doors and windows. The Solid Pine WM 886 Door Stop is applied to the head and side jambs to cover the area where the door or window meets the frame. The door stop is used to cover the area where the door meets the door frame. It is also used to stop or reduce the swing of a door.

  • Dimensions: 3/8″ x 1-3/8″
  • Sold by the foot
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Narrow moulding with a classic edge style
  • Can also accent shelving, cabinets, or any other interior elements
  • Installs with standard woodworking tools
3/8" x 1-3/8" x 14’ Colonial Pine Stop Moulding

3/8″ x 1-3/8″ x 14′ Colonial Pine Stop Moulding

Nail the 3/8″ x 1-3/8″ Solid Pine Stop to the head and side jambs of doors and windows to constrict movement; it can be applied to walls, doors, and furniture.

  • Dimensions: 3/8″ x 1-3/8″
  • Length: 14′
  • Beautiful wood grain with a rustic flair
  • Stain grade pine – use your favorite stain
  • Excellent workability
  • Applied to door and window jambs, prevents doors from swinging through the door opening
  • Moulding installs in a snap using brad nails
3/8" x 1-3/8" x 14’ Pine Door Stop

3/8″ x 1-3/8″ x 14′ Pine Door Stop

WM856 Pine Door Stops are typically applied around doors and windows. The Pine WM856 Door Stop is applied to the head and side jambs to cover the area where the door or window meets the frame. Door stops are used to cover the area where the door meets the door frame. It also is used to stop or reduce the swing of a door.

  • Dimensions: 3/8″ x 1-3/8″
  • Length: 14′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Narrow moulding with a classic edge style
  • Accents shelving, cabinets, or any other interior elements
  • Installs with standard woodworking tools
3/8" x 7/8" x 13’ Clear Pine Window Stop

3/8″ x 7/8″ x 13′ Clear Pine Window Stop

Clear pine mouldings are an excellent choice when looking for budget-friendly material that can be stained or painted. They are easy to cut and install using basic woodworking tools common to most homes.

  • Dimensions: 3/8″ x 7/8″
  • Length: 13′
  • Easily installs with common woodworking tools
  • Clear pine mouldings represent a great value
  • Solid pine has a smooth grain that is easy to paint or stain

PVC Trim & Mouldings

11/16" x 1-1/8" x 16' PVC Base Cap Moulding

11/16″ x 1-1/8″ x 16′ PVC Base Cap Moulding

Cap Mouldings are designed to add a clean and decorative focal point to any wall or ceiling surface. Can be used alone or in combination with other mouldings to create elegant sharp depth, character, and style.

  • Dimensions: 1-1/8″ x 5/8″
  • Length: 16′
  • Outstanding quality made from 100% recycled polystyrene
  • Lightweight and durable
  • Impervious to moisture and insects
  • Easy to install using common woodworking tools
  • Use painters caulk to finish nails or screw holes and joints
  • Can paint with any high-quality acrylic latex paint
  • Won’t rot or mold
  • Meticulously extruded to show care inline details
  • Has a sharp, clean, and smooth surface
9/16" x 1-5/8" x 16' PVC Bed Moulding

9/16″ x 1-5/8″ x 16′ PVC Bed Moulding

PVC 75 Bed Mould is used to cover the gap where walls meet ceilings. Bed mould is typically smaller in size than crown moulding and has a more symmetrical appearance. PVC 75 bed mould can use anywhere crown moulding

  • Dimensions: 9/16″ x 1-5/8″
  • Length: 16″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Insect-resistant and moisture-resistant product that will not warp, rot or crack
  • Classic small profile that won’t overwhelm small rooms
  • Can also be added to bookcases and shelving units for that finishing look
1-1/4" x 2" x 17'6" PVC Brick Moulding

1-1/4″ x 2″ x 17’6″ PVC Brick Moulding

Brick mouldings are installed outside the home around door units and sometimes around window units. Brick mouldings cover the gap between the door or window unit and the adjacent house framing, adding an element of visual interest to any window or door.

  • Dimensions: 2″ x 1-1/4″
  • PVC material
  • Will not rot, crack, splinter, or split
  • Resistant to moisture, no mold, and mildew
  • Impervious to insects
  • Does not require painting if not desired
  • Paint prep is minimal, and no sanding is required
  • Outstanding for exterior or interior use
9/16" x 3-5/8" x 16' PVC Crown Moulding

9/16″ x 3-5/8″ x 16′ PVC Crown Moulding

Whether it is classic or contemporary, Crown mouldings encompass a great selection of correct period designs, patterns, and sizes for a wide variety of applications. Plain Crown mouldings are used to decorate a ceiling creatively, adding an architectural focal point to any room with style and beauty. Plain Crown mouldings are extruded, showing extreme care for its crisp lines, which provides an elegant detail. They are lightweight, strong, and easy to install using standard woodworking tools.

  • Dimensions: 9/16″ x 3-5/8″
  • Length: 16′
  • Lightweight and durable
  • Impervious to moisture and insects
  • Easy to install using common woodworking tools
  • Use painters caulk to finish nails or screw holes and joints
  • Can paint with any high-quality acrylic latex paint
  • Won’t rot or mold
  • Meticulously extruded to show care about inline details
  • Has a sharp, clean, and smooth surface
11/16" x 1-5/8" x 16' PVC Drip Cap

11/16″ x 1-5/8″ x 16′ PVC Drip Cap

100% PVC window, door and garage surrounds, trim, fascia and decorative moulding provides a beautiful, durable option to costly wood trim. Whether you’re building a new home or remodeling and existing, there are Royal Moulding trim products to suit virtually any taste or style to give every home a unique look all its own. Add moulding to your home adds value and a nice finishing touch to any room.

  • Dimensions: 11/16″ x 1-5/8″
  • Length: 16′
  • PVC has superior nailing and gluing
  • Product finish: primed
  • Product is moisture proof, termite proof and does not promote mold and mildew
  • Installing PVC saves time and labor
  • Product installs easily with standard woodworking tools
1-5/8" x 11/16" x 16’ PVC Drip Cap Moulding

1-5/8″ x 11/16″ x 16’ PVC Drip Cap Moulding

Ideal to transition siding and trim, PVC Drip Cap is designed for the top of doors and windows to help drain water past casings. The like-wood quality of the cellular vinyl makes it an ideal material to use when paired with its moisture-, rot- and termite-proof construction.

  • Dimensions: 1-5/8″ x 11/16″
  • Length: 16′
  • Pre-finished in a white hue but can be re-painted with oil or latex paint to suit your project’s needs
  • Moisture, termite, and rot-proof for a long-lasting accent
1/4" x 1-1/2" x 16’ PVC Lattice Moulding

1/4″ x 1-1/2″ x 16′ PVC Lattice Moulding

An attractive option to wood trim, this 100% PVC window, door, and garage surrounds, trim, fascia, and decorative moulding is a terrific solution.

  • Dimensions: 1/4″ x 1-1/2″
  • Length: 16′
  • Adding moulding to your home adds value and a nice finishing touch to any room.
  • PVC has superior nailing and gluing
  • Product is moisture-proof, termite-proof, and does not promote mold and mildew
  • Installing PVC saves time and labor
  • Installs easily with standard woodworking tools
3/4” x 3/4” x 16’ PVC Shoe Moulding

3/4″ x 3/4″ x 16′ PVC Shoe Moulding

WM127 PVC Base Shoe makes a great transition between base moulding and flooring. PVC WM127 Base Shoe can also be used to cover gaps where flooring surfaces meet base moulding. Base Shoe is also used to cover small alignment challenges where hard surface flooring meets the wall.

  • Dimensions: 7/16″ x 3/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex or oil-based paint/stain
  • Classic small profile moulding useful in covering small gaps
  • Can be used to accent traditional base mouldings
  • Installs with standard woodworking tools
9/16" x 1-5/8" x 16’ PVC Rake Moulding

9/16″ x 1-5/8″ x 16′ PVC Rake Moulding

The 11/16″ x 1-5/8″ Solid Pine Shingle is used on the rake of a building or around exterior window frames. It may also be used in applications similar to panel moulds. Other uses for rake moulding include covering corner wall cracks, accent pieces for doors and walls, and cabinetry work.

  • Dimensions: 11/16″ x 1-5/8″
  • Length: 16′
  • Will not rot, crack, splinter, or split
  • Resistant to moisture, no mold, and mildew
  • Impervious to insects
  • Does not require painting if not desired
  • Paint prep is minimal, and no sanding is required
  • Outstanding for exterior or interior use
1-1/16" x 2" x 16' PVC Rake Moulding

1-1/16″ x 2″ x 16′ PVC Rake Moulding

WM 287 PVC Shingle or Rake Moulding is typically used on a house’s fascia to help channel water from the roof to the ground. Use rake moulding around exterior windows instead of brick mould. PVC WM 287 Shingle Mould can also be used as a panel mould to create judges panels or separation between different wall coverings.

  • Dimensions: 1-1/16″ x 2″
  • Length: 16′
  • Will not rot, crack, splinter or split
  • Resistant to moisture, no mold, and mildew
  • Impervious to insects
  • Does not require painting if not desired
  • Paint prep is minimal, and no sanding is required
  • Outstanding for exterior or interior use
1-3/8" x 1-5/16” Belly Sill Nosing - Per Foot

1-3/8″ x 1-5/16″ Belly Sill Nosing

1-3/8″ x 1-5/16″ PVC Sill Moulding is rot-resistant. The prefinished moulding can be painted to match the look of your home. Adding moulding to your home or office adds value and a nice finishing touch.

  • Dimensions: 1-3/8″ x 1-5/16″
  • Sold per foot
  • Made of PVC
  • Pre-finished for easy painting
  • Moisture rot and termite resistant
  • Use to replace damaged or rotten window sill nosing
  • For exterior and interior use
  • Easy to install with nails or construction adhesive

Rake Moulding

9/16" x 1-5/8" x 16’ Finger-Jointed Primed Rake Moulding

9/16″ x 1-5/8″ x 16′ Finger-Jointed Primed Rake Moulding

The 9/16 x 1-5/8″ Rake Moulding is used on the rake of a building or around exterior window frames. It may also be used in applications similar to panel moulds. Other uses for rake moulding include covering corner wall cracks, accent pieces for doors and walls, and cabinetry work

  • Dimensions: 9/16″ x 1-5/8″
  • Length: 16′
  • Beautiful wood grain with a rustic flair
  • Stain grade pine – use your favorite stain
  • Excellent workability
  • Typically used for paneled wall effects similar to a panel mould
  • Moulding installs in a snap using brad nails
5/8" x 1-5/8" x 16’ Finger-Jointed Primed Rake Moulding

5/8″ x 1-5/8″ x 16′ Finger-Jointed Primed Rake Moulding

WM210 Prime Finger-Jointed Shingle or Rake Moulding is typically used on a house’s fascia to help channel water from the roof to the ground. Use rake moulding around exterior windows instead of brickmould. Prime Finger-Jointed WM210 Shingle Mould can also be used as a panel mould to create judges panels or separation between different wall coverings.

  • Dimensions: 5/8″ x 1-5/8″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Installs with standard woodworking tools
  • Can also be used to cap wainscot panels
11/16" x 3-1/4" x 16’ Finger-Jointed Primed Rake Casing

11/16″ x 3-1/4″ x 16′ Finger-Jointed Primed Rake Casing

WM 286 Primed Finger-Jointed Casing is used around doors and windows to cover the gaps between the frames and walls. Primed Finger-Jointed WM 286 Casing is the finishing touch on any window and door. You can combine casing with a back band to create a bold one of a kind look.

  • Dimensions: 11/16″ x 3-1/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • A traditional pattern that creates a classic style for your doors and windows
  • Installs with standard woodworking tools
1-1/16” x 2” x 16’ Primed Pine Rake Moulding

1-1/16″ x 2″ x 16′ Primed Pine Rake Moulding

The 11/16″ x 1-5/8″ Primed Pine Shingle is used on a building’s rake or around exterior window frames. It may also be used in applications similar to panel moulds. Other uses for rake moulding include covering corner wall cracks, accent pieces for doors and walls, and cabinetry work.

  • Dimensions: 11/16″ x 1-5/8″
  • Length: 16′
  • Beautiful wood grain with a rustic flair
  • Stain grade pine – use your favorite stain
  • Excellent workability
  • Typically used for paneled wall effects similar to a panel mould
  • Moulding installs in a snap using brad nails

Stool Mouldings

7/8" x 2-3/4" Finger-Jointed Primed Window Stool

7/8″ x 2-3/4″ Finger-Jointed Primed Window Stool

WM 1164 Primed Pine Window Stool is an interior moulding that serves as a sash or window frame sill cap. This stool can rejuvenate your existing windows with minimum work. Window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 7/8″ x 2-3/4″
  • FJ Primed
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
11/16" x 5-1/4" Finger-Jointed Primed Window Stool

11/16″ x 5-1/4″ Finger-Jointed Primed Window Stool

Primed Finger-Jointed WM1021 window stool is an interior moulding that serves as a sash or window frame sill cap. This non-rabbeted primed window sill can be used to rejuvenate your existing windows with minimum work. Window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 11/16″ x 5-1/4″
  • Smooth, consistent surface is free from knots
  • Can be painted with any high-quality latex or oil-based paint
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style
11/16" x 2-1/2" Pine Window Stool Moulding

11/16″ x 2-1/2″ Pine Window Stool Moulding

WM 1195 Pine Window Stool is an interior moulding that serves as a sash or window frame sill cap. This Pine WM 1195 Window Sill can be used to rejuvenate your existing windows with minimum work. Window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 11/16″ x 2-1/2″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
11/16" x 2-3/8" Pine Stool Moulding

11/16″ x 2-3/8″ Pine Stool Moulding

Solid Pine WM 1197 Window Stool is an interior moulding that serves as a sash or window frame sill cap. Use this window stool to rejuvenate your existing windows with minimum work. Window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 11/16″ x 2-3/8″
  • Sold by the foot
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
1-1/16” x 3-1/4" Finger-Jointed Primed Window Stool

1-1/16″ x 3-1/4″ Finger-Jointed Primed Window Stool

WM 1163 Pine Window Stool is an interior moulding that serves as a sash or window frame sill cap. This Pine WM 1163 Window Sill can rejuvenate your existing windows with minimum work. Window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 1-1/16″ x 3-1/4″
  • Sold per foot
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
1-1/16” x 5-1/4" Finger-Jointed Primed Window Stool Moulding

1-1/16″ x 5-1/4″ Finger-Jointed Primed Window Stool Moulding

WM 1020 Pine Window Stool is an interior moulding that serves as a sash or window frame sill cap. This Pine WM 1020 Window Sill can be used to rejuvenate your existing windows with minimum work. Window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 1-1/16″ x 5-1/4″
  • Sold per foot
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
11/16" x 2-1/2" Clear Pine Window Stool

11/16″ x 2-1/2″ Clear Pine Window Stool

WM 1195 Pine Window Stool is an interior moulding that serves as a sash or window frame sill cap. This Pine WM 1195 Window Sill can be used to rejuvenate your existing windows with minimum work. Window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 11/16″ x 2-1/2″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
1-1/16” x 2-3/4" Primed Pine Window Stool with 7/8” Rabbit

1-1/16″ x 2-3/4″ Primed Pine Window Stool with 7/8″ Rabbit

WM 1164 Primed Pine Window Stool is an interior moulding that serves as a sash or window frame sill cap. This stool can rejuvenate your existing windows with minimum work. A window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 1-1/16″ x 2-3/4″ with 7/8″ Rabbit
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
1-1/16" x 5-1/4" Primed Stool

1-1/16″ x 5-1/4″ Primed Stool

Primed Finger Jointed Window Stool is an interior moulding that serves as a sash or window frame sill cap. This Primed FingerJoint WM1021 Window Stool can be used to rejuvenate your existing windows with minimum work. Window stool is the finishing touch for any style window. This pattern also eases the transition from the window frame to the wall.

  • Dimensions: 1-1/16″ x 5-1/4″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Has a simple colonial edge to match most mouldings
  • A classic pattern that works with any style

Other Trim

1/2" x 7/8" Sash Bead

1/2″ x 7/8″ Sash Bead

Moulding and trim are a simple way to add definition and character to any room. Secure windows in style with this pine sash bead.

  • Dimensions: 1/2″ x 7/8″
  • For interior use
7/16" x 1-3/8" Sash Bead

7/16″ x 1-3/8″ Sash Bead

Moulding and trim are a simple way to add definition and character to any room. Secure windows in style with this pine sash bead.

  • Dimensions: 7/16″ x 1-3/8″
  • For interior use
1/4" x 3/4" x 12’ Screen Bead Moulding

1/4″ x 3/4″ x 12′ Screen Bead Moulding

Pine WM142 Screen Moulding is typically used to cover the seams where window screening meets the frame. Also, use Pine WM142 Screen Moulding to cover seams and transitions between wallpaper and painted walls. Screen mould can also be used to cover the raw edges of plywood.

  • Dimensions: 1/4″ x 3/4″
  • Length: 12′
  • Smooth, consistent surface is free from knots
  • Can be stained or painted with any high-quality latex or oil-based paint and stain
  • Classic small profile moulding useful in covering small gaps
  • Can also be used to accent shelving, cabinets, or any other interior elements
9/16" x 2-3/4" x 16’ Finger-Jointed Primed Bed Moulding

9/16″ x 2-3/4″ x 16′ Finger-Jointed Primed Bed Moulding

WM 70 Prime Finger-Jointed Crown Moulding is used where walls meet ceilings. Prime Finger-Jointed WM 70 Crown Moulding is the best way to add interest to any room or space.

  • Dimensions: 9/16″ x 2-3/4″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Installs with standard woodworking tools
  • Can be used to create mantels or cornices
9/16" x 1-5/8" x 14' Pine Bed Mould

9/16″ x 1-5/8″ x 14′ Pine Bed Mould

WM 75 Pine Bed Moulding is used where walls meet ceilings. Pine WM 75 Bed Moulding is the best way to add interest to any room or space.

  • Dimensions: 9/16″ x 1-5/8″
  • Length: 14′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Installs with standard woodworking tools
  • Can be used to create mantels or cornices
  • Spring Angle – 45/45
9/16" x 1-5/8" x 16' Finger-Jointed Primed Bed Mould

9/16″ x 1-5/8″ x 16′ Finger-Jointed Primed Bed Mould

WM 75 Prime Finger-Jointed Crown Moulding is used where walls meet ceilings. Prime Finger-Jointed WM 75 Crown Moulding is the best way to add interest to any room or space.

  • Dimensions: 9/16″ x 1-5/8″
  • Length: 16′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be painted with any high-quality latex-based paint
  • Installs with standard woodworking tools
  • Can be used to create mantels or cornices
  • Spring Angle – 45/45
1-1/4" x 1-1/4" x 14’ Pine Full Round Moulding

1-1/4″ x 1-1/4″ x 14′ Pine Full Round Moulding

WM 233 Pine Full Round is typically used as a closet rod. Pine WM 233 can be used for any application where a round profile is needed. This simple round pattern has a variety of uses.

  • Dimensions: 1-1/4″ x 1-1/4″
  • Length: 14′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Installs with standard woodworking tools
  • Great for tomato stakes and closet rods
11/16" x 11/16" x 16' Pine Inside Corner / Cove

11/16″ x 11/16″ x 16′ Pine Inside Corner / Cove

Pine Cove Moulding is ideal when you need a quality, low-profile moulding to hide any gaps at the wall and ceiling junction. It can also be applied together with another crown moulding for added detail. It has one primary curve and comes ready to be stained.

  • Dimensions: 11/16″ x 11/16″
  • Length: 16′
  • Beautiful wood grain with a rustic flair
  • Stain grade pine – use your favorite stain
  • Excellent workability
  • Use as a decorative finish where walls meet ceilings
  • Moulding installs in a snap using brad nails
1-1/16" x 1-1/16" x 13' Pine Outside Corner Moulding

1-1/16″ x 1-1/16″ x 13′ Pine Outside Corner Moulding

Clear pine mouldings are an excellent choice when looking for budget-friendly material that can be stained or painted. They are easy to cut and install using basic woodworking tools typical to most homes.

  • Dimensions: 1-1/16″ x 1-1/16″
  • Length: 13′
  • Easily installs with common woodworking tools- Clear pine mouldings represent a great value
  • Solid pine has a smooth grain that is easy to paint or stain
  • S4S (surfaced/squared four sides)
1/4" x 1-1/2" x 10’ Pine Lattice Moulding

1/4″ x 1-1/2″ x 10′ Pine Lattice Moulding

WM 266 Pine Lattice Mould is one of the most common and versatile moulding patterns. Pine WM 266 Lattice mould can be used to cover seams in wall paneling. Lattice can also be used in many craft projects.

  • Dimensions: 1/4″ x 1-1/2″
  • Length: 10′
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Installs with standard woodworking tools
  • Can be combined with other mouldings to create a unique look
  • Can also be added to bookcases and shelving units for that finishing look
11/16" x 1-5/8" Pine S4S Mull Moulding

11/16″ x 1-5/8″ Pine S4S Mull Moulding

WM249 Pine S4S moulding can be used for a wide variety of projects. Pine WM249 S4S moulding is great for constructing cabinets or bookcases. Some S4S mouldings can be used as balusters to support handrails. S4S is also a great addition to many moulding combinations.

  • Dimensions: 11/16″ x 1-5/8″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Installs with standard woodworking tools
  • Can also be used to accent shelving, cabinets, or any other interior elements
1/2" x 3/4" x 9’ Pine S4S Parting Bead

1/2″ x 3/4″ Pine S4S Parting Bead

Lengths: 9′, 14′

WM 254 Pine S4S moulding can be used for various projects. Pine WM 254 S4S moulding is great for constructing cabinets or bookcases. Some S4S mouldings can be used as balusters to support handrails. S4S is also a great addition to many moulding combinations.

  • Dimensions: 1/2″ x 3/4″
  • Smooth, consistent surface is free from knots and is ready to finish
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • Installs with standard woodworking tools
  • Can also be used to accent shelving, cabinets, or any other interior elements
11/16" x 1-3/4" Picture Frame Moulding

11/16″ x 1-3/4″ Picture Frame Moulding

Picture Frame Moulding has a smooth, yet detailed look that is ideal for many applications. It’s perfect for picture framing, capping, or edging on any project. This solid moulding may be clear-coated, stained, or painted to match your existing decor.

  • Dimensions: 11/16″ x 1-3/4″
  • Perfect for picture frames, shelf edging, or capping
  • Ideal for many applications
  • Can be clear-coated, stained, or painted
1-3/16” x 3-7/8" Pine Plinth Moulding

1-3/16″ x 3-7/8″ Pine Plinth Moulding

Plinth Block Moulding makes it easy to install the base moulding. Adds a touch of elegance to any entranceway. This moulding eliminates the need to make miter cuts.

  • Dimensions: 1-3/16″ x 3-7/8″
  • Smooth, consistent surface is free of knots and is perfect for finishing or simply creating a sleek appearance
  • Can be stained or painted with any high-quality latex or oil-based paint/stain
  • A classic pattern that works with any style
  • Installs with standard woodworking tools
3/4" x 3/4" x 16’ Primed Quarter Round

3/4″ x 3/4″ x 16′ Primed Quarter Round

Primed Pine Quarter Round Moulding adds a finishing touch to anything from walls to cabinetry. It is commonly used as an embellishment to existing structures and moulding applications. It is typically installed inside corners where two surfaces meet at 90 degrees. This is one of the most common mouldings used in crafts and home projects.

  • Dimensions: 3/4″ x 3/4″
  • Length: 16′
  • Easily installs with standard woodworking tools
  • Wood mouldings are easily cut
  • Painted white – ready to install
1/2" x 3/4" Oak Scotia Moulding

1/2″ x 3/4″ Oak Scotia Moulding

Install Scotia moulding under the nosing of each tread of a stair. The Scotia moulding hides the joining between the tread and the stair’s riser and offers a rich and warm natural wood accent for interior environments. The Scotia is also the name of the concave part of the moulding. It is sold bare and can be finished to match your construction.

  • Dimensions: 1/2″ x 3/4″
  • Sold by the foot
  • Solid wood construction
1/2" x 3/4" Pine Scotia Moulding

1/2″ x 3/4″ Pine Scotia Moulding

WM 131 Scotia or Cove moulding is a type of moulding usually installed under the nosing of each tread of a stair. The Scotia moulding hides the joining between the tread and the riser of the stair. The Scotia is also the name of the concave part of a moulding. Offers a rich and warm natural wood accent for interior environments. It is sold bare and can be finished to match your construction.

  • Dimensions: 1/2″ x 3/4″
  • Sold by the foot
  • Solid wood construction
1-1/4" x 6-1/2" Primed Window Sill Moulding

1-1/4″ x 6-1/2″ Primed Window Sill Moulding

Sill Moulding is rot-resistant. The prefinished moulding can be painted to match the look of your home. Adding moulding to your home or office adds value and a nice finishing touch.

  • Dimensions: 1-1/4″ x 6-1/2″
  • Pre-finished for easy painting
  • Moisture rot and termite resistant
  • Use to replace damaged or rotten window sill nosing
  • For exterior and interior use
  • Easy to install with nails or construction adhesive
1-1/4" x 2” x 7’ Pine Astragal Moulding

1-1/4″ x 2″ x 7′ Pine Astragal Moulding

The T-astragal stops a door from swinging. It is attached to one side of a door that is rabbeted to a T shape to the approximate thickness of the swinging door. T-astragals help in blocking sound and light transfer from one room to another.

  • Dimensions: 1-1/4″ x 2″
  • Length: 7′
  • Excellent workability
  • Used to hide space between double doors
  • Moulding installs in a snap using brad nails
  • Designed for 1-3/8″ thick door. 1/2″ gap between doors